Yay the replacement has arrived, Im sooo excited!
Gwyn when are you having a cutting party!!!!!!!!!!!
When the weather is nice, and I have time to roll up and tie 100 straw mats.
Need 400 Rubber bands.
P.S. Please TAKE CARE now !
Remember how sharp that Shinto is ! also remember the 360 degree and 4 metres rule.
Read all the TAKE CARE STUFF on this forum AGAIN !
NOW !
Oh and also read about the Carbon Steel...don't touch the blade, if you cut with it DRY IT IMMIDIATELY.
Before re-Sheathing.
NEVER RE SHEATH AN USED BLADE WITHOUT THOROUGHLY DRYING IT FIRST.
Get yourself a whole roll of Kitchen roll from the kitchen.(or Tesco)
Once dry and re-sheathed..you can oil it later on at your leisure, but this MUST BE DONE SAME DAY.
NEVER LEAVE IT AND SAY "Oh I'll oil it tomorrow"
Strip it - uchiko it (GENTLY - Don't be rough or youll lose your Hamon) then oil it until it has a thin coating.
Did you get a cleaning kit with it ?
If not. I have some spare oil I made myself.. I will give you the recipie.
NEVER USE ANYTHING ELSE ! Never use WD40 It is NOT an oil ! Never Use heavy oil.